Página 1 dos resultados de 74 itens digitais encontrados em 0.110 segundos

Bonding agent underneath sealant: shear bond strength to oil-contaminated

BORSATTO, Maria Cristina; THOMAZ, Michelle Yamamoto; CONTENTE, Marta Maria Martins Giamatei; GOMES-SILVA, Jaciara Miranda; MELLARA, Talitha de Siqueira; GALO, Rodrigo; PALMA-DIBB, Regina Guenka
Fonte: Fundação Odontológica de Ribeirão Preto Publicador: Fundação Odontológica de Ribeirão Preto
Tipo: Artigo de Revista Científica
ENG
Relevância na Pesquisa
96.43%
This study evaluated in vitro the shear bond strength of a resin-based pit-and-fissure sealant (Fluroshield - F) associated with either an ethanol-based (Adper Single Bond 2 - SB) or an acetone-based (Prime & Bond - PB) adhesive system under conditions of oil contamination. Mesial and distal enamel surfaces from 30 sound third molars were randomly assigned to 2 groups (n=30): I - no oil contamination; II - oil contamination. Contamination (0.25 mL during 10 s) was performed after 37% phosphoric acid etching with an air/oil spray. The specimens were randomly assigned to subgroups, according to the bonding protocol adopted: subgroup A - F was applied to enamel without an intermediate bonding agent layer; In subgroups B and C, SB and PB, respectively, were applied, light-cured, and then F was applied and light-cured. Shear bond strength was tested at a crosshead speed of 0.5 mm/min in a universal testing machine. Means (± SD) in MPa were: IA-11.28 (±1.84); IIA-12.02 (±1.15); IB-9.73 (±2.38); IIB-9.62 (±2.29); IC-28.30 (±1.63); and IIC-25.50 (±1.91). It may be concluded that the oil contamination affected negatively the sealant bonding to enamel and the acetone-based adhesive system (PB) layer applied underneath the sealant was able to prevent its deleterious effects to adhesion.; Este estudo avaliou in vitro a resistência ao cisalhamento (RC) de um selante resinoso [Fluroshield (F); Dentsply/Caulk] em associação com um sistema adesivo com solvente a base de etanol [Adper Single Bond 2 (SB); 3M/ESPE] ou a base de acetona [Prime & Bond (PB); 3M/ESPE] após contaminação com óleo do esmalte. Superfícies mesiais e distais de esmalte de 30 terceiros molares hígidos foram aleatoriamente alocadas em 2 grupos (n=30): I - contaminação com óleo; II - sem contaminação. A contaminação foi realizada (0...

Avaliação de dois cimentos de ionômero de vidro comparados a um selante resinoso, utilizados para selamento de fossas e fisuras aplicados em esmalte bovino hígido, sob condições de severo desafio cariogênico: estudo in situ; Evaluation of two glass ionomer cements compared to a resin sealant, employed for pit and fissure sealing on intact bovine enamel, under severe cariogenic challenge - in situ study

Biella, Vivian de Agostino
Fonte: Biblioteca Digitais de Teses e Dissertações da USP Publicador: Biblioteca Digitais de Teses e Dissertações da USP
Tipo: Dissertação de Mestrado Formato: application/pdf
Publicado em 02/03/2007 PT
Relevância na Pesquisa
96.52%
Este estudo in situ, desenvolvido em uma fase de 14 dias, teve como objetivo avaliar o efeito de dois cimentos de ionômero de vidro (CIV) comparados a um selante resinoso, utilizados para selamento de fossas e fissuras aplicados em esmalte bovino hígido, com acúmulo de biofilme dentário, por meio da análise do conteúdo de flúor do biofilme dentário e da microdureza em secção longitudinal. Foram utilizados 88 blocos de esmalte (4mm x 4mm) de incisivos bovinos, selecionados por seu valor de microdureza inicial. Os blocos formaram uma fissura artificial em forma de "V" a qual foi selada, para compor os seguintes grupos: GI-CIVav (Ketac? Molar Easymix); GII-CIV modificado por resina (Vitremer?); GIII-selante resinoso sem flúor (Helioseal® Clear) ou GIV-controle, sem selamento. As fissuras artificiais foram fixadas em um dispositivo intrabucal palatino (DIP), em duas fileiras distintas que foram cobertas por uma tela plástica para favorecer o acúmulo de biofilme dentário. Onze voluntários utilizaram o DIP 24 h/dia; gotejaram 8x/dia, uma solução de sacarose a 20% e, uma solução de dentifrício fluoretado (3ml de água deionizada : 1g de dentifrício fluoretado) sobre todas as fissuras 3x/dia. Após o período experimental...

Resistência ao cisalhamento de selante associado a dois sistemas adesivos, após contaminação salivar: influência da fotopolimerização individual e simultânea; Shear bond strength of a pit-and-fissure sealant associated with two adhesive systems after salivary contamination: influence of individual and simultaneous light curing

Silva, Jaciara Miranda Gomes da
Fonte: Biblioteca Digitais de Teses e Dissertações da USP Publicador: Biblioteca Digitais de Teses e Dissertações da USP
Tipo: Dissertação de Mestrado Formato: application/pdf
Publicado em 06/08/2007 PT
Relevância na Pesquisa
126.6%
Este trabalho teve por objetivo avaliar "in vitro" a resistência ao cisalhamento de um selante resinoso (Fluroshield - F) em associação com um sistema adesivo total-etch (Adper Single Bond 2-SB) e um self-etching (Clearfil S3 Bond-S3) em condições de contaminação salivar, comparando dois protocolos de fotopolimerização: individual do sistema adesivo e, em seguida, do selante ou simultânea de ambos materiais conjuntamente. Superfícies mesiais e distais de 45 terceiros molares humanos hígidos foram incluídas e planificadas, o sítio de adesão delimitado (Ø 3mm) e os corpos-de-prova alocados aleatoriamente em 6 grupos experimentais (n=15), de acordo com o tratamento empregado: I- F aplicado sobre o esmalte condicionado com ácido fosfórico a 37% (controle). Os demais grupos foram contaminados com saliva (0,01ml por 10 s) e a seguir foram aplicados: II- SB e F fotopolimerizados separadamente; III- SB e F fotopolimerizados conjuntamente; IVS3 e F fotopolimerizados separadamente; V- S3 e F fotopolimerizados simultaneamente; VI- F aplicado sem associação com adesivos sobre o esmalte condicionado e contaminado. A seguir, um cilindro de selante foi confeccionado com o auxílio de uma mesa metálica e de matriz de teflon bipartida sobre o sítio de adesão. Após armazenamento durante 24 horas a 37°C em água destilada...

Avaliação in vitro de propriedades mecânicas, químicas e antimicrobianas de um selante de fossas e fissuras isento de bisfenol A; In vitro evaluation of mechanical, chemical and antimicrobial properties of a bisphenol A-free pit-and-fissure sealant

Aguiar, Soraia Monique Fiorati
Fonte: Biblioteca Digitais de Teses e Dissertações da USP Publicador: Biblioteca Digitais de Teses e Dissertações da USP
Tipo: Tese de Doutorado Formato: application/pdf
Publicado em 21/05/2010 PT
Relevância na Pesquisa
126.7%
Tendo em vista o importante papel desempenhado pelos selantes de fossas e fissuras na prevenção da cárie dental, o objetivo do presente estudo foi avaliar in vitro propriedades mecânicas, químicas e ntimicrobianas do selante isento de bisfenol A Embrace Wetbond™. Para os testes de resistência ao cisalhamento e microinfiltração foram selecionados 135 terceiros molares hígidos, extraídos de humanos, divididos aleatoriamente em 6 grupos: (I) selante Fluroshield® sem contaminação; (II) selante Embrace Wetbond™ sem contaminação; (III) selante Fluroshield® contaminado com saliva; (IV) selante Embrace Wetbond™ contaminado com saliva; (V) selante Fluroshield® contaminado com água; e (VI) selante Embrace Wetbond™ contaminado com água. No estudo de resistência ao cisalhamento os dentes foram seccionados no sentido vestíbulo-lingual, a porção radicular removida e as superfícies mesiais e distais foram embebidas em resina de poliéster. Após o condicionamento do esmalte, foi aplicado o selante com o auxílio de uma matriz de Teflon®. Os espécimes foram termociclados e submetidos ao teste de resistência ao cisalhamento com uma velocidade de 0,5mm/min e célula de carga de 50kgf. Os resultados foram comparados empregando a análise de variância (ANOVA) e pós-teste de Tukey. No estudo de microinfiltração...

In situ evaluation of the remineralizing capacity of pit and fissure sealants containing amorphous calcium phosphate and/or fluoride

Silva, Kelio Garcia; Pedrini, Denise; Botazzo Delbem, Alberto Carlos; Ferreira, Lilian; Cannon, Mark
Fonte: Taylor & Francis As Publicador: Taylor & Francis As
Tipo: Artigo de Revista Científica Formato: 11-18
ENG
Relevância na Pesquisa
96.6%
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES); Objective. This in situ study evaluated the remineralizing potential of pit and fissure sealants containing amorphous calcium phosphate (ACP) and/or fluoride in artificially induced carious lesions on smooth enamel surfaces. Material and methods. Ten volunteers who wore acrylic palatal devices were enrolled in this 5-day double-blind study and assigned to one of the following five groups: (I) demineralized enamel slab+Fluroshield (sealant with fluoride); (11) demineralized enamel slab+Aegis (sealant with ACP); (III) demineralized enamel slab+experimental sealant with fluoride (ESF); (IV) demineralized enamel slab +experimental sealant with fluoride/ACP (ACP-F); and (V) demineralized enamel slab (control). After the experimental period, the percentage of surface microhardness recovery(%SMHR) and the integrated loss of subsurface hardness (Delta KHN) were evaluated. The concentrations of fluoride, calcium and phosphorus in enamel were also determined. Results. The sealants containing ACP and/or fluoride presented a higher remineralizing capacity (%SMHR and Delta KHN) than that of the control group. Aegis provided either more efficient or similar remineralization than the other sealants. The association between ACP and fluoride did not show a greater efficacy in the remineralization. F...

The Influence of Pit and Fissure Sealants on Infrared Fluorescence Measurements

Diniz, M. B.; Rodrigues, J. A.; Hug, I.; Cordeiro, R. C. L.; Lussi, A.
Fonte: Karger Publicador: Karger
Tipo: Artigo de Revista Científica Formato: 328-333
ENG
Relevância na Pesquisa
96.63%
The aim of this in vitro study was to evaluate the influence of pit and fissure sealants on fluorescence readings using lasers. We selected 166 permanent molars and randomly divided them into 4 groups which were each treated with a different sealant (a commercially available clear sealant, 2 opaque sealants and an experimental nanofilled clear sealant). The teeth were independently measured twice by 2 experienced dentists using conventional laser fluorescence (LF) and a laser fluorescence pen device (LFpen), before and after sealing, and again after thermocycling to simulate the thermal stressing between the tooth and the dental materials. Friedman test showed no statistically significant changes using LF and LFpen for the commercial clear sealant group, although values tended to increase after sealing. However, the values increased significantly after thermocycling. There was a statistically significant decrease in fluorescence after application of opaque sealants. After application of the experimental nanofilled clear sealant, LF values increased only after thermocycling, whereas the LFpen values increased after sealing and after thermocycling as well. The intraclass correlation coefficient ranged from 0.87 to 0.96 for interexaminer and 0.82 to 0.94 for intraexaminer reproducibility. It was shown that pit and fissure sealants influence LF and LFpen readings...

Microleakage evaluation of pit and fissure sealants done with different procedures, materials, and laser after invasive technique

Do Rego, Marcos Augusto; De Araujo, Maria Amelia Maximo
Fonte: Universidade Estadual Paulista Publicador: Universidade Estadual Paulista
Tipo: Revisão Formato: 63-68
ENG
Relevância na Pesquisa
96.65%
This study evaluated the microleakage of pit and fissure sealants after different surface preparation (invasive technique and laser irradiation) and the use of different materials (fluoride resin-filled sealant, resin-modified glass ionomer cement and adhesive system). Eighty-four pre molars were used in this study, which were divided into seven groups. After the accomplishment of the different treatments, these were submitted to thermocycling process and assess for microleakage by examination under an epifluorescent microscope and scored zero to seven. Two specimens of each group were observed under scanning electron microscope (SEM). The results showed that laser irradiation did not lessen microleakage in pit and fissures when using a filled-resin sealant with fluoride or a resin-modified glass ionomer cement. The use of laser irradiation and adhesive system, followed by a resin-filled sealant with fluoride, showed the lowest microleakage scores in pit and fissures. Comparing this group to the resin-modified glass ionomer cement group, there was statistical significance. The use of a adhesive system decreased microleakage when using a fluoride resin-filled sealant with or without previous laser irradiation; although it was not statistically significant.

Longitudinal photographic observation of the occurrence of bubbles in pit and fissure sealants

Sundfeld, Renato Herman; Croll, Theodore P.; Mauro, Silvio José; Briso, André Luiz Fraga; De Alexandre, Rodrigo Sversut; Sundefeld, Maria Lúcia Marçal Mazza
Fonte: Universidade Estadual Paulista Publicador: Universidade Estadual Paulista
Tipo: Artigo de Revista Científica Formato: 27-32
ENG
Relevância na Pesquisa
96.28%
The purpose of this study was to employ photographic evaluation to observe the presence or absence of bubbles in pit and fissure sealants Concise and Prisma Shield, at 7 days, 18 months, 36 months and 11 years after accomplishment of treatment. Methods: A hematoxylin-based staining solution was applied to the occlusal surface at the study periods, which allowed assessment of the sealing material on the surface. All occlusal surfaces were photographed and the photographs corresponding to each period were subjected to photographic evaluation. Results: There was statistically significant difference only at 18 months, with a significantly higher number of specimens with bubbles for the Prisma Shield sealant compared to the Concise, whereas the groups were similar at all other study periods. On the other hand, separate analysis of subsequent periods of the sealants did not reveal any significant difference. Conclusions: According to the results of the present longitudinal investigation, it may be concluded that the sealing materials showed that bubbles came into and went out with time. However, this fact did not interfere with its clinical purpose, provided the remaining material covers the expected region of pits and fissures.

Length of resin tags in pit-and-fissure sealants: all-in-one self-etching adhesive vs phosphoric acid etching.

dos Santos, Karina Tonini; Sundfeld, Renato Herman; Garbin, Cléa Adas Saliba; de Alexandre, Rodrigo Sversut; Sundefeld, Maria Lúcia Marçal Mazza; Ceolim, Bruna Nakae
Fonte: Universidade Estadual Paulista Publicador: Universidade Estadual Paulista
Tipo: Artigo de Revista Científica Formato: 186-192
ENG
Relevância na Pesquisa
106.58%
PURPOSE: To investigate the penetration (tags) of adhesive materials into enamel etched with phosphoric acid or treated with a self-etching adhesive, before application of a pit-and-fissure sealant. MATERIALS AND METHODS: The sample comprised six study groups with six specimens each. Before pit-and-fissure sealing with the materials Clinpro SealantTM (Groups I and II), Vitro Seal ALPHA (Groups III and IV) and Fuji II LC (Groups V and VI), the teeth in Groups I, III, and V were etched with 35% phosphoric acid for 30 seconds. Teeth in Groups II, IV, and VI received application of the self-etching adhesive Adper Prompt L-Pop. The treated teeth were sectioned buccolingually, ground to 100-microm thickness, decalcified, and analyzed by conventional light microscopy at 400x magnification. RESULTS: The teeth etched with phosphoric acid exhibited significantly greater penetration than specimens treated with self-etching adhesive. CLINICAL SIGNIFICANCE: When compared with enamel treated with a self-etching adhesive, the penetration (tags) of adhesive materials into enamel was greater when applied on enamel etched with phosphoric acid.

Twenty years experience with pit and fissure sealants

Sundfeld, Renato Herman; Fraga Briso, André Luiz; Mauro, Silvio José; De Alexandre, Rodrigo Sversut; Neto, Daniel Sundfeld; De Oliveira, Fernanda Garcia; Machado, Lucas Silveira
Fonte: Universidade Estadual Paulista Publicador: Universidade Estadual Paulista
Tipo: Artigo de Revista Científica Formato: 249-263
ENG
Relevância na Pesquisa
106.61%
Twenty years of investigations on the use of pit and fissure sealants are presented with emphasis on application techniques, types of materials and long-term follow-up. After two decades of routine provision of pit and fissure sealants, we are able to conclude that placement of bonded resin sealant material is a highly effective approach for prevention of pit and fissure caries, provided the sealant material is correctly applied. © 2009 Nova Science Publishers, Inc.

In Vitro evaluation of microleakage of different materials used as pit-and-fissure sealants

Pardi,Vanessa; Sinhoreti,Mário Alexandre Coelho; Pereira,Antonio Carlos; Ambrosano,Gláucia Maria Bovi; Meneghim,Marcelo de Castro
Fonte: Fundação Odontológica de Ribeirão Preto Publicador: Fundação Odontológica de Ribeirão Preto
Tipo: Artigo de Revista Científica Formato: text/html
Publicado em 01/01/2006 EN
Relevância na Pesquisa
96.41%
The aim of this study was to evaluate in vitro the marginal microleakage of different materials used as pit-and-fissure sealants (Delton, Filtek Flow, Dyract Flow and Vitremer). Fifty-six extracted sound human third molars were randomly assigned to 4 groups (n=14). After sealant placement, the teeth were thermocycled (500 cycles; 5ºC, 37ºC and 55ºC), isolated, immersed in 2% buffered methylene blue dye for 4 h, included in acrylic resin and sectioned longitudinally in a buccolingual direction. The sections were analyzed for leakage using an stereomicroscope. A 4-criteria ranked scale was used to score dye penetration. All materials exhibited dye penetration to some extension and no statistically significant difference was observed among the groups (p>0.05). In conclusion, the findings of this study showed that a flowable composite resin, a flowable compomer and resin-modified glass ionomer placed on occlusal pits and fissures had similar marginal sealing as the unfilled self-cured resin-based sealant.

Bonding agent underneath sealant: shear bond strength to oil-contaminated

Borsatto,Maria Cristina; Thomaz,Michelle Yamamoto; Contente,Marta Maria Martins Giamatei; Gomes-Silva,Jaciara Miranda; Mellara,Talitha de Siqueira; Galo,Rodrigo; Palma-Dibb,Regina Guenka
Fonte: Fundação Odontológica de Ribeirão Preto Publicador: Fundação Odontológica de Ribeirão Preto
Tipo: Artigo de Revista Científica Formato: text/html
Publicado em 01/01/2010 EN
Relevância na Pesquisa
96.43%
This study evaluated in vitro the shear bond strength of a resin-based pit-and-fissure sealant (Fluroshield - F) associated with either an ethanol-based (Adper Single Bond 2 - SB) or an acetone-based (Prime & Bond - PB) adhesive system under conditions of oil contamination. Mesial and distal enamel surfaces from 30 sound third molars were randomly assigned to 2 groups (n=30): I - no oil contamination; II - oil contamination. Contamination (0.25 mL during 10 s) was performed after 37% phosphoric acid etching with an air/oil spray. The specimens were randomly assigned to subgroups, according to the bonding protocol adopted: subgroup A - F was applied to enamel without an intermediate bonding agent layer; In subgroups B and C, SB and PB, respectively, were applied, light-cured, and then F was applied and light-cured. Shear bond strength was tested at a crosshead speed of 0.5 mm/min in a universal testing machine. Means (± SD) in MPa were: IA-11.28 (±1.84); IIA-12.02 (±1.15); IB-9.73 (±2.38); IIB-9.62 (±2.29); IC-28.30 (±1.63); and IIC-25.50 (±1.91). It may be concluded that the oil contamination affected negatively the sealant bonding to enamel and the acetone-based adhesive system (PB) layer applied underneath the sealant was able to prevent its deleterious effects to adhesion.

Longitudinal photographic observation of the occurrence of bubbles in pit and fissure sealants

Sundfeld,Renato Herman; Croll,Theodore P.; Mauro,Silvio José; Briso,André Luiz Fraga; Alexandre,Rodrigo Sversut de; Sundefeld,Maria Lúcia Marçal Mazza
Fonte: Faculdade De Odontologia De Bauru - USP Publicador: Faculdade De Odontologia De Bauru - USP
Tipo: Artigo de Revista Científica Formato: text/html
Publicado em 01/01/2006 EN
Relevância na Pesquisa
96.28%
The purpose of this study was to employ photographic evaluation to observe the presence or absence of bubbles in pit and fissure sealants Concise and Prisma Shield, at 7 days, 18 months, 36 months and 11 years after accomplishment of treatment. METHODS: A hematoxylin-based staining solution was applied to the occlusal surface at the study periods, which allowed assessment of the sealing material on the surface. All occlusal surfaces were photographed and the photographs corresponding to each period were subjected to photographic evaluation. RESULTS: There was statistically significant difference only at 18 months, with a significantly higher number of specimens with bubbles for the Prisma Shield sealant compared to the Concise, whereas the groups were similar at all other study periods. On the other hand, separate analysis of subsequent periods of the sealants did not reveal any significant difference. CONCLUSIONS: According to the results of the present longitudinal investigation, it may be concluded that the sealing materials showed that bubbles came into and went out with time. However, this fact did not interfere with its clinical purpose, provided the remaining material covers the expected region of pits and fissures.

A 12-month clinical evaluation of pit-and-fissure sealants placed with and without etch-and-rinse and self-etch adhesive systems in newly-erupted teeth

Nogourani,Maryam Karami; Janghorbani,Mohsen; Khadem,Parvin; Jadidi,Zahra; Jalali,Shahriar
Fonte: Faculdade De Odontologia De Bauru - USP Publicador: Faculdade De Odontologia De Bauru - USP
Tipo: Artigo de Revista Científica Formato: text/html
Publicado em 01/06/2012 EN
Relevância na Pesquisa
96.62%
OBJECTIVES: The objective of this one-year clinical study was to investigate the effect of two adhesive systems (Adper Single Bond, a two-step etch-and-rinse and Clearfil SE Bond, a two-step self-etch system) on pit-and-fissure sealant retention in newly-erupted teeth. This study compared the success of the sealants in mesial and distopalatal grooves with and without these two adhesive systems. MATERIAL AND METHODS: In a clinical trial, 35 children aged 6-8 years undergoing sealant placement were recruited. This one-year clinical study scored 70 mesial and 70 distopalatal sealants of newly-erupted permanent maxillary first molar, with a split-mouth design. All children received sealant alone in one permanent maxillary molar tooth. Children were randomized into two groups. One group received Self-etch (Se) bond plus sealant and the other group received Single Bond plus sealant in another permanent maxillary molar tooth. Clinical evaluation at 3, 6 and 12 months was performed and the retention was studied in terms of the success and failure. RESULTS: The success rate of sealant in the distopalatal groove, using SeB at 3, 6 and 12 months was 93.3% (95% CI: 68.0, 99.8), 73.3% (95% CI: 44.9, 92.2) and 66.7% (95% CI: 38.4, 88.2), respectively. It was greater than that of the distopalatal groove in SB group with a success rate of 62.5% (95% CI: 35.4...

Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing

GOMES-SILVA, Jaciara Miranda; TORRES, Carolina Paes; CONTENTE, Marta Maria Martins Giamatei; OLIVEIRA, Maria Angélica Hueb de Menezes; PALMA-DIBB, Regina Guenka; BORSATTO, Maria Cristina
Fonte: Fundação Odontológica de Ribeirão Preto Publicador: Fundação Odontológica de Ribeirão Preto
Tipo: Artigo de Revista Científica
ENG
Relevância na Pesquisa
126.57%
This study evaluated in vitro the shear bond strength (SBS) of a resin-based pit-and-fissure sealant [Fluroshield (F), Dentsply/Caulk] associated with either an etch-and-rinse [Adper Single Bond 2 (SB), 3M/ESPE] or a self-etching adhesive system [Clearfil S3 Bond (S3), Kuraray Co., Ltd.] to saliva-contaminated enamel, comparing two curing protocols: individual light curing of the adhesive system and the sealant or simultaneous curing of both materials. Mesial and distal enamel surfaces from 45 sound third molars were randomly assigned to 6 groups (n=15), according to the bonding technique: I - F was applied to 37% phosphoric acid etched enamel. The other groups were contaminated with fresh human saliva (0.01 mL; 10 s) after acid etching: II - SB and F were light cured separately; III - SB and F were light cured together; IV - S3 and F were light cured separately; V - S3 and F were light cured simultaneously; VI - F was applied to saliva-contaminated, acid-etched enamel without an intermediate bonding agent layer. SBS was tested to failure in a universal testing machine at 0.5 mm/min. Data were analyzed by one-way ANOVA and Fisher's test (α=0.05).The debonded specimens were examined with a stereomicroscope to assess the failure modes. Three representative specimens from each group were observed under scanning electron microscopy for a qualitative analysis. Mean SBS in MPa were: I-12.28 (±4.29); II-8.57 (±3.19); III-7.97 (±2.16); IV-12.56 (±3.11); V-11.45 (±3.77); and VI-7.47 (±1.99). In conclusion...

Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing

Gomes-Silva,Jaciara Miranda; Torres,Carolina Paes; Contente,Marta Maria Martins Giamatei; Oliveira,Maria Angélica Hueb de Menezes; Palma-Dibb,Regina Guenka; Borsatto,Maria Cristina
Fonte: Fundação Odontológica de Ribeirão Preto Publicador: Fundação Odontológica de Ribeirão Preto
Tipo: Artigo de Revista Científica Formato: text/html
Publicado em 01/01/2008 EN
Relevância na Pesquisa
126.57%
This study evaluated in vitro the shear bond strength (SBS) of a resin-based pit-and-fissure sealant [Fluroshield (F), Dentsply/Caulk] associated with either an etch-and-rinse [Adper Single Bond 2 (SB), 3M/ESPE] or a self-etching adhesive system [Clearfil S3 Bond (S3), Kuraray Co., Ltd.] to saliva-contaminated enamel, comparing two curing protocols: individual light curing of the adhesive system and the sealant or simultaneous curing of both materials. Mesial and distal enamel surfaces from 45 sound third molars were randomly assigned to 6 groups (n=15), according to the bonding technique: I - F was applied to 37% phosphoric acid etched enamel. The other groups were contaminated with fresh human saliva (0.01 mL; 10 s) after acid etching: II - SB and F were light cured separately; III - SB and F were light cured together; IV - S3 and F were light cured separately; V - S3 and F were light cured simultaneously; VI - F was applied to saliva-contaminated, acid-etched enamel without an intermediate bonding agent layer. SBS was tested to failure in a universal testing machine at 0.5 mm/min. Data were analyzed by one-way ANOVA and Fisher's test (α=0.05).The debonded specimens were examined with a stereomicroscope to assess the failure modes. Three representative specimens from each group were observed under scanning electron microscopy for a qualitative analysis. Mean SBS in MPa were: I-12.28 (±4.29); II-8.57 (±3.19); III-7.97 (±2.16); IV-12.56 (±3.11); V-11.45 (±3.77); and VI-7.47 (±1.99). In conclusion...

Influence of etching time and bonding strategies on the microshear bond strength of self- and light-cured pit-and-fissure sealants

Souza-Junior,Eduardo José; Borges,Boniek Castillo Dutra; Montes,Marcos Antônio Japiassú Resende; Alonso,Roberta Caroline Bruschi; Ambrosano,Glaucia Maria Bovi; Sinhoreti,Mário Alexandre Coelho
Fonte: Fundação Odontológica de Ribeirão Preto Publicador: Fundação Odontológica de Ribeirão Preto
Tipo: Artigo de Revista Científica Formato: text/html
Publicado em 01/10/2012 EN
Relevância na Pesquisa
106.63%
This study evaluated the impact of extended etching and bonding strategies on the microshear bond strength of three sealant materials. Two pit-and-fissure sealants [FluroShield, Dentsply (light-cured) and AlphaSeal, DFL (self-cured)] and one light-cured flowable composite resin (Permaflo, Ultradent) were evaluated according to different enamel etching times (15 s or 30 s) and bonding procedures (no adhesive application, application of primer/hydrophobic resin or hydrophobic resin only). Intact enamel blocks were obtained from bovine teeth and sealed via the tested protocols. After 24 h, the microshear bond strength test was performed in a universal testing machine at a crosshead speed of 0.5 mm/min. Failure modes were classified by stereomicroscopy. Data were submitted to a three-way ANOVA and to Tukey's test (α=0.05). There was no statistically significant difference (p>0.05) among the materials. Permaflo showed higher bond strength when etched for 30 s alone. Enamel overetching decreased the bond strength of the light-cured sealant. Primer/bond previous treatment improved bond performance for AlphaSeal. In conclusion, from the tested conditions, all sealant materials presented similar bond strength values in relation to bonding protocol and etching time. The flowable composite can be used as a pit-and-fissure sealant. The use of a three-step adhesive system was essential for the self-cured sealant application.

A 12-month clinical evaluation of pit-and-fissure sealants placed with and without etch-and-rinse and self-etch adhesive systems in newly-erupted teeth

Nogourani, Maryam Karami; Janghorbani, Mohsen; Khadem, Parvin; Jadidi, Zahra; Jalali, Shahriar
Fonte: Universidade de São Paulo. Faculdade de Odontologia de Bauru Publicador: Universidade de São Paulo. Faculdade de Odontologia de Bauru
Tipo: info:eu-repo/semantics/article; info:eu-repo/semantics/publishedVersion; ; Formato: application/pdf
Publicado em 01/06/2012 ENG
Relevância na Pesquisa
96.62%
OBJECTIVES: The objective of this one-year clinical study was to investigate the effect of two adhesive systems (Adper Single Bond, a two-step etch-and-rinse and Clearfil SE Bond, a two-step self-etch system) on pit-and-fissure sealant retention in newly-erupted teeth. This study compared the success of the sealants in mesial and distopalatal grooves with and without these two adhesive systems. MATERIAL AND METHODS: In a clinical trial, 35 children aged 6-8 years undergoing sealant placement were recruited. This one-year clinical study scored 70 mesial and 70 distopalatal sealants of newly-erupted permanent maxillary first molar, with a split-mouth design. All children received sealant alone in one permanent maxillary molar tooth. Children were randomized into two groups. One group received Self-etch (Se) bond plus sealant and the other group received Single Bond plus sealant in another permanent maxillary molar tooth. Clinical evaluation at 3, 6 and 12 months was performed and the retention was studied in terms of the success and failure. RESULTS: The success rate of sealant in the distopalatal groove, using SeB at 3, 6 and 12 months was 93.3% (95% CI: 68.0, 99.8), 73.3% (95% CI: 44.9, 92.2) and 66.7% (95% CI: 38.4, 88.2), respectively. It was greater than that of the distopalatal groove in SB group with a success rate of 62.5% (95% CI: 35.4...

Observação fotográfica da ocorrência de bolhas em selantes de fóssulas e fissuras; Longitudinal photographic observation of the occurrence of bubbles in pit and fissure sealants

Sundfeld, Renato Herman; Croll, Theodore P.; Mauro, Silvio José; Briso, André Luiz Fraga; Alexandre, Rodrigo Sversut de; Sundefeld, Maria Lúcia Marçal Mazza
Fonte: Universidade de São Paulo. Faculdade de Odontologia de Bauru Publicador: Universidade de São Paulo. Faculdade de Odontologia de Bauru
Tipo: info:eu-repo/semantics/article; info:eu-repo/semantics/publishedVersion; ; Formato: application/pdf
Publicado em 01/01/2006 ENG
Relevância na Pesquisa
96.28%
Avaliação fotográfica para observar a presença ou a ausência de bolhas nos selantes de fóssula e fissuras Concise e Prisma Shield aos 7 dias, 18 meses, 36 meses e 11 anos, após a realização dos selamentos. METODOLOGIA: Foi aplicado na superfície oclusal, em todos os períodos de análise, uma solução corante a base de hematoxilina, que possibilitou a verificação e a avaliação dos materiais seladores presentes nesta superfície. Todas as superfícies oclusais foram fotografadas e as fotografias, correspondentes a cada período em análise, foram submetidas à avaliação fotográfica. RESULTADOS: Verificou-se diferença estatisticamente significativa somente aos 18 meses de análise, com o selante Prisma Shield apresentando um número significativamente maior de bolhas superficiais, que o selante Concise; enquanto que os demais grupos apresentaram-se estatisticamente semelhantes entre si, em todos os outros períodos de análise. Por outro lado, quando os selantes foram analisados isoladamente, nos períodos subseqüentes, não foi observada a presença de diferença estatisticamente significativa. CONCLUSÃO: De acordo com os resultados observados, pudemos verificar que os materiais seladores apresentaram o aparecimento e o desaparecimento de bolhas...

Ex vivo microleakage comparison between glass ionomers used as pit and fissure sealants

Sly,Gabriela E; Missana,Liliana R; Nieva,Nicolás; Kaplan,Andrea E
Fonte: Acta Odontológica Latinoamericana Publicador: Acta Odontológica Latinoamericana
Tipo: Artigo de Revista Científica Formato: text/html
Publicado em 01/08/2015 EN
Relevância na Pesquisa
106.35%
The aim of this study was to evaluate in vitro the marginal microleakage of two glass ionomer materials used as pit and fissure sealants. Thirty healthy premolars extracted for orthodontic treatment were randomly assigned to two groups (n=15) and respectively sealed with two glass ionomers (Group I, Fuji VII and Group II, Fuji IX). All teeth were preserved in artificial saliva (NAF) for 10 days, thermocycled (250 cycles; 5oC, 37oC and 60oC), isolated, and immersed in 2% alcohol gentian violet blue solution for 24 h. After washing, teeth were included in acrylic resin and sectioned longitudinally in a bucco-lingual direction with a Struers-Minitom cutting device. Samples were analyzed for leakage using an optical microscope (Olympus BX- 60M). TheWilliams and Winter semi-quantitative ranked scale was used to score dye penetration. In Group I the grades were distributed as follows: Grade 1, 1 sample and Grade 3, 14 samples (Mean 2.87 Median 3, SD 0.52). In Group II: Grade 0: 4 samples, Grade 1, 3 samples, Grade 2, 2 samples and Grade 3, 6 samples (Mean 1.67, Median 2, SD 1.29). Fisher's exact test showed statistically significant differences between materials (p=0.006). From these results, we conclude that Fuji IX had better marginal sealing than Fuji VII when used as a pit and fissure sealant.